 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| MN3008资料 | |
|
MN3008 PDF Download |
|
File Size : 116 KB
Manufacturer:PANASONIC Description:READ SEQUENCE (READ): Reading the device via the SO (Serial Output) pin requires the following sequence. After the CS line is pulled low to select a device, the READ op-code is transmitted via the SI line followed by the byte address to be read (A15-A0, Refer to Table 6). Upon completion, any data on the SI line will be ignored. The data (D7-D0) at the specified address is then shifted out onto the SO line. If only one byte is to be read, the CS line should be driven high after the data comes out. The READ sequence can be continued since the byte address is automati- cally incremented and data will continue to be shifted out. When the highest address is reached, the address counter will roll over to the lowest address allowing the entire memory to be read in one continuous READ cycle. |
|
| 相关型号 | |
| ◆ XC68HC912D60VPV8 | |
| ◆ XC68HC912D60MFU8 | |
| ◆ XC68HC912D60CPV8 | |
| ◆ XC68HC912D60CFU8 | |
| ◆ XC68HC912BD32CFU | |
| ◆ XC68HC912B32VFU8 | |
| ◆ XC68HC912B32MFU8 | |
| ◆ XC68HC912B32CFU8 | |
| ◆ XC68HC705B32CFN | |
| ◆ XC56303VF100 | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：MN3008 厂 家：PANASONIC 封 装： 批 号：400 数 量：DIP8 说 明： |
|||||
|
运 费： 所在地： 新旧程度： |
|||||
| 联系人：关女士 |
| 电 话：86-75584720945 |
| 手 机： |
| QQ：371911117 |
| MSN：gjk8477@hotmail.com,jessica848377@yahoo.com.cn |
| 传 真：86-755 25621209 |
| EMail：kingrand_tek@163.com |
| 公司地址： Huaqiang Electronic World, Futian District, Shenzhen, China |
