首页 > 推广型号列表 > FW82801EB

FW82801EB

FW82801EB资料
	FW82801EB PDF Download

File Size : 116 KB Manufacturer:INTEL Description:The LM3519 is a step-up converter for white LED applica- tions that uses a unique and proprietary pulse frequency modulation (PFM) architecture to optimize high efficiency at high frequency operation. Unlike most PFM architecture implementations, the LM3519s unique architectural imple- mentation results in non-pulse skipping variable frequency operation. The regulator is forced to operate at the edge of Continous Conduction Mode (CCM). The error amplifier will set the end of the on-time (IPEAK of inductor) based on the load (LEDs) current. During this operation, the inductor cur- rent ramps up and reaches a peak current at end of the on-time. At this point, the internal power switch is turned off until the inductor current reaches zero, and the cycle repeats again. The switching frequency is set based on the charge (on-time) and discharge(off-time) of the inductor current. The frequency can range between 2MHz to 8MHz over the op- erating input range. The LM3519 operation can be best understood through an examination of the block diagram in Figure 2. When LED