 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| FT232BM资料 | |
|
FT232BM PDF Download |
|
File Size : 116 KB
Manufacturer:FTDI Description:Both pairs of switches have over-current protection. Depending on whether SEL is high or low, a current VCC over 1.2A or 200mA respectively out of either output causes the device to enter a constant-current mode, SEL where the output voltage is progressively reduced to prevent the current from increasing further. Each VSBY output is independent of the other, so if one of the switches is switched on but is not in overcurrent mode then it will remain switched on. The OC# output becomes active only if the overcurrent condition exceeds a minimum continuous duration of 10ms. If the overcurrent condition is severe enough that the part heats up to the thermal limit TMAX, the switch turns off and the temperature cools down to TMIN. The switch then turns on again, and the device heats up again, and so on, until the fault is removed. |
|
| 相关型号 | |
| ◆ XC68HC912D60VPV8 | |
| ◆ XC68HC912D60MFU8 | |
| ◆ XC68HC912D60CPV8 | |
| ◆ XC68HC912D60CFU8 | |
| ◆ XC68HC912BD32CFU | |
| ◆ XC68HC912B32VFU8 | |
| ◆ XC68HC912B32MFU8 | |
| ◆ XC68HC912B32CFU8 | |
| ◆ XC68HC705B32CFN | |
| ◆ XC56303VF100 | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：FT232BM 厂 家：FTDI 封 装：QFP32 批 号： 数 量：300 说 明：QFP32 |
|||||
|
运 费： 所在地： 新旧程度： |
|||||
| 联系人：关女士 |
| 电 话：86-75584720945 |
| 手 机： |
| QQ：371911117 |
| MSN：gjk8477@hotmail.com,jessica848377@yahoo.com.cn |
| 传 真：86-755 25621209 |
| EMail：kingrand_tek@163.com |
| 公司地址： Huaqiang Electronic World, Futian District, Shenzhen, China |
