首页 > 推广型号列表 > EPM7160EQC100-10P

EPM7160EQC100-10P

EPM7160EQC100-10P资料
	EPM7160EQC100-10P PDF Download

File Size : 116 KB Manufacturer:ALTERA Description:NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given in parentheses for general information only. 3. Refer to applicable symbol list. 4. The US Government preferred system of measurement is the metric SI system. However, this item was originally designed using inch-pound units of measurement. In the event of a conflict between the metric and inch-pound units, the inch-pound units shall take precedence. 5. Lead number 1 is the emitter, lead number 2 is the base, lead number 4 is omitted from this outline. The collector is number 3 and is electrically connected to the case. 6. Beyond r (radius) max, TW shall be held for a minimum length of 0.011 inch (0.28 mm). 7. TL measured from maximum HD. 8. Outline in this zone is not controlled. 9. CD shall not vary more than 0.010 inch (0.25 mm) in zone P. This zone is controlled for automatic handling. 10. Leads at gauge plane 0.054 + 0.001 - 0.000 inch (1.37 +0.03 - 0.00 mm) below seating plane shall be within 0.007 inch (0.18 mm) radius of true position (TP) at maximum material condition (MMC) relative to tab at MMC. 11. LU applies between L1 and L2. LD applies between L2 and LL minimum. Diameter is uncontrolled in L1 and beyond LL minimum. 12. All three leads. 13. r (radius) applies to both inside corners of tab.

	1PCS	100PCS	1K	10K
价格


型号：EPM7160EQC100-10P 厂家：ALTERA 封装：120 批号：06+ 数量：QFP100 说明：


运费：所在地：新旧程度：