首页 > 推广型号列表 > EP1S40F1020C5N

EP1S40F1020C5N

EP1S40F1020C5N资料
	EP1S40F1020C5N PDF Download

File Size : 116 KB Manufacturer:ALTERA Description:DESCRIPTION Power input pins for VCC operate mode. 2.8 to 5.5 volts operation. Either pin can be used for VCC . Only one is required for normal operation. (See VBATO pin description and Power Control section). Interrupt output pin: Open drain. Reset input pin for 3-wire operation. (See Parasite Power section.) Data input/output pin for 3-wire operation. Data input/output for 1-Wire operation: Open drain. (See Parasite Power section.) Clock input pin for 3-wire operation. No connection pins. Ground pin: Either pin can be used for ground. Battery backup input pin: Battery voltage can be 2.8 to 5.5 volts. (See VBATO pin description and Power Control section.) Battery operate input pin for 2.8 to 5.5 volt operation. The VCC & VBATB pins must be grounded when this pin is used to power the chip. (See Power Control section.) 1 Hz square wave output: Open drain. Crystal pins. Connections for a standard 32.768 kHz quartz crystal, EPSON part number C-002RX or C-004R (be sure to request 6 pF load capacitance). NOTE: X1 and X2 are very high impedance nodes. It is recommended that they and the crystal be guard-ringed with ground and that high frequency signals be kept away from the crystal area. See Figure 18 and Application Note 58 for details.

	1PCS	100PCS	1K	10K
价格


型号：EP1S40F1020C5N 厂家：ALTERA 封装：120 批号：07+ 数量：BGA 说明：


运费：所在地：新旧程度：