 |
|||||||
|
|||||||
|
|
|||||||
|
|||||||
|
|
| BCX71J资料 | |
|
BCX71J PDF Download |
|
File Size : 116 KB
Manufacturer:INFINEON Description:FUNCTIONAL DESCRIPTION STAND-BY STATE The external capacitor,Cx, is fully charged to Vcc in the stand-by state. Hence, before triggering, transistor Qp and Qn (connected to the Rx/Cx node) are both turned-off. The two comparators that control the timing and the two reference voltage sources stop operating. The total supply current is therefore only leakage current. TRIGGER OPERATION Triggering occurs when : 1 st) A is "LOW" and B has a falling edge; 2 nd) B is "HIGH" and A has a rising edge; 3 rd) A is "LOW" and B is HIGH and C1 has a rising edge; After the multivibrator has been retriggered comparator C1 and C2 start operating and Qn is turned on. Cx then discharges through Qn. The voltage at the node R/C external falls. When it reaches VREFL the output of comparator C1 becomes low. This in turn reset the flip-flop and Qn is turned off. At this point C1 stops functioning but C2 continues to operate. The voltage at R/C external begins to rise with a time constant set by the external components Rx, Cx. Triggering the multivibrator causes Q to go high after internal delay due to the flip-flop and the gate. Q remains high until the voltage at R/C external rises again to VREFH . At this point C2 |
|
| 相关型号 | |
| ◆ XC68HC912D60VPV8 | |
| ◆ XC68HC912D60MFU8 | |
| ◆ XC68HC912D60CPV8 | |
| ◆ XC68HC912D60CFU8 | |
| ◆ XC68HC912BD32CFU | |
| ◆ XC68HC912B32VFU8 | |
| ◆ XC68HC912B32MFU8 | |
| ◆ XC68HC912B32CFU8 | |
| ◆ XC68HC705B32CFN | |
| ◆ XC56303VF100 | |
| 1PCS | 100PCS | 1K | 10K | ||
| 价 格 | |||||
|
型 号：BCX71J 厂 家：INFINEON 封 装：06+ 批 号：2400 数 量：SOT-23 说 明： |
|||||
|
运 费： 所在地： 新旧程度： |
|||||
| 联系人：关女士 |
| 电 话：86-75584720945 |
| 手 机： |
| QQ：371911117 |
| MSN：gjk8477@hotmail.com,jessica848377@yahoo.com.cn |
| 传 真：86-755 25621209 |
| EMail：kingrand_tek@163.com |
| 公司地址： Huaqiang Electronic World, Futian District, Shenzhen, China |
建议使用分辨率:1024*768